Quick Quote
Contact us by filling out the form below.
The Kleen-Flo Robotic Duct Cleaning system is an indispensable tool for anyone who wants to inspect and clean COMMERCIAL, INDUSTRIAL and/or RESIDENTIAL ventilation systems.
It is designed to improve cleaning quality by removing the dirt, debris and other contaminants air washing alone leaves behind. All the components in the Kleen-Flo Robotic Duct Cleaning system have been field-tested and fine-tuned to maximize your productivity and cleaning quality.
Mechanically operated brushes designed to loosen and move debris adhered to interior HVAC surfaces.
If you need industrial-strength cleaning power – Kleen-Flo has you covered
Our previous work in industrial areas include jobs such as:
We have also serviced sites that require more precise attention to detail such as:
We offer our same state-of-the-art cleaning services that are popular with our residential customers to our commercial clients as well.
Regular air duct cleaning will improve the air quality in your home dramatically. By cleaning your air ducts, you reduce the dust and allergens that can aggravate asthma and other respiratory ailments.
Kleen-Flo’s method of cleaning utilizes high vacuum and compressed air in combination with direct mechanical scrubbing to remove all dust and debris throughout the system.
We connect our gas-powered vacuum truck to the main duct lines placing them under suction. While under suction, an agitation device along with compressed air is blown through the registers and duct lines. We then run a compressed air scrubber through all the main ductwork coming off the furnace. This is vital to the cleaning process as the dirt must be loosened and worked back towards the vacuum to ensure removal. The vacuum, compressed air, and the air scrubber will effectively remove dirt and debris throughout the ductwork.
Kleen-Flo also covers cleaning the fan compartment and filter housing at no additional charge.
Ductwork runs throughout an entire house and is the main component of your ventilation system. Naturally, it is important to keep these ducts clean and sanitized to prevent the spread of germs and spores through the air. Mold is the primary concern with ducts, as it can easily build up in these isolated areas and can be tough to eradicate. The proper application of sanitizer and deodorizer is done through the use of a machine that can coat the entire lining of your HVAC system and should you require this service to be performed, please ask us about whether or not your home really requires it.
NOTE: this process is done through the use of a FOGGER and is up to the discretion of the homeowner (ask us why!), we use a 100% natural sanitizer and deodorizer called Benefect.
Benefect is an ingenious mixture of plant extracts that surpasses government efficacy requirements for hospital disinfectants but that, unbelievably, are also Generally Recognized As Safe (GRAS) or as Direct Food Additives by the FDA. Benefect’s botanical active ingredient is classified by the EPA as having no known adverse affects to human health or the environment.
Benefect is classified under the EPA’s highest safety rating category allowed under law for all routes of exposure which include:
• Inhalation
• Ingestion
• Skin Irritation
• Skin Sensitization
• Eye Irritation
Therefore, Benefect does not even require a caution statement on the label which has been the standard minimum requirement for all products by the EPA until now. As well, Benefect is non-corrosive, non-flammable and non-reactive. It contains no ammonia, chlorine, oxidizers or alcohols & even has a neutral pH.
Benefect provides an optional anti-bacterial spray. The duct system is coated with an anti-bacterial spray that helps to disinfect and deodorize your ductwork. This product is applied as a mist to your supply air handling side of the furnace. This product has been approved by Health Canada for use on various hard surfaces and can last up to forty-five days.
Benefect is a 100% natural disinfectant & fungicide. Benefect (Broad Spectrum Disinfectant & Fungicide) contains botanically pure plant extracts and has been proven to kill 99.99% of bacteria, yeast, molds, fungus, and fungal spores.
Blocked Bathroom exhaust vents can lead to severe moisture problems, creating mildew stained walls and ceilings. These vents are also an attractive nesting ground for birds, bees and even squirrels. Kleen-Flo professionals remove and clean airflow exhaust vents, fan blades, fan ductwork, fan plenum, and other related ductwork.
A heat recovery ventilator (HRV) brings in fresh air from the outside, preheats the incoming air during the winter and precools the incoming air during the summer. It can provide clean fresh air every day while helping to keep energy costs low. One set of ducts collects stale moist air from the kitchen, laundry, and bathrooms. This stale contaminated air passes through the HRV unit and is exhausted to the outside. The other ducting system draws in fresh clean air from outdoors through the HRV unit. As the two air streams pass each other within the heat exchanger core, heat is transferred from the outgoing stale air to the fresh incoming air. There is no mixing of air streams. The HRV unit is able to capture up to 85% of the energy from the outgoing stale air. Filtered, preconditioned fresh air is delivered where you need it – in the living areas of your home.
ARE YOU AT RISK OF A DRYER FIRE?
Clothes (especially towels or jeans) take a very long time to dry.
Clothes are hotter than usual at the end of the cycle.
Flapper on vent hood doesn’t open when dryer is on.
If you notice any of these signs, schedule a professional dryer cleaning or inspection immediately. You could save money and even your life with this simple procedure.
There’s a hidden danger spot in most homes today. Chances are you don’t look at it or even think about it. It’s the vent from your clothes dryer. Over time, it fills with lint that slips past your dryer’s filter. Overheating results as the lint builds up, and then you’re just a step away from a fire.
After a significant build-up of debris in the dryer vent hose, the dryer overheats and the lint catches fire. Combustibles in the immediate vicinity then help fuel the fire.
Unlike many health and safety issues we are faced with within the home, this safety problem has an easy and economical solution. The best way to prevent the possibility of a dryer fire harming your home and family is with a thorough dryer inspection by the professionals at Kleen-Flo.
A key to effective dryer performance is optimal airflow. A properly installed all-metal dryer vent will help ensure this airflow. Skilled technicians from Kleen-Flo will check to ensure there is proper airflow for the dryer and that the right equipment is in use.
In addition, numerous financial benefits are derived from annual dryer vent cleaning. Removing the lint allows the dryer to operate more efficiently, reducing energy costs significantly. Drying times are decreased. And, your dryer can last much longer since it’s not operating at the higher temperatures that are caused by the lint buildup. The charge for this service is surprisingly reasonable, and it pays for itself in lower service and utility costs.
CLICK HERE FOR A FREE QUOTATION
Make sure to avoid cheap low power portable units duct cleaning “Kits” attached to carpet cleaning equipment.
Our certified technicians connect a state-of-the-art industrial power vacuum truck capable of moving thousands of cubic feet of air per minute to your duct and furnace system.
Regular air duct cleaning will improve the air quality in your home dramatically. By cleaning your air ducts, you reduce the dust and allergens that can aggravate asthma and other respiratory ailments.
Kleen-Flo’s method of cleaning utilizes high vacuum and compressed air in combination with direct mechanical scrubbing to remove all dust and debris throughout the system. We connect our gas powered vacuum truck to the main duct lines placing them under suction. While under suction, an agitation device along with compressed air is blown through the registers and duct lines. We then run a compressed air scrubber through all the main ductwork coming off the furnace. This is vital to the cleaning process as the dirt must be loosened and worked back towards the vacuum to ensure removal. The vacuum, compressed air and the air scrubber will effectively remove dirt and debris throughout the ductwork. Kleen-Flo also covers cleaning the fan compartment and filter housing at no additional charge.